Ribbon Fire

Ribbon Fire

Ribbon Fire Flowing
Flame Pro Professional
Orbiter Round heart
About Fanola® Digi Clean and environmentally friendly

Ribbon Fire Technical Information

Installation Requirements

  1. The insert has to be set into a specially prepared recess which is to be made of fireproof materials like marble, granite, ceramics, tempered glass or building board.
  2. The product casing should be made of fire-safe plasterboard fixed to the metal-framed construction.
  3. The minimum surface area of the room (with ceilings of 2,6m / 8,53ft) must be at least 36m2 / 387,5ft2.
  4. An electrical lead should be installed on the inside of the recess in order to provide power to the unit. If it cannot be done, the electrical socket should not be further than 1,5m / 4,92ft from the product.
  5. The room must have proper working ventilation with a regular provision of fresh air.
  6. All freestanding or loose flammable objects must be located no closer than 1m to the product.
  7. Product should not be installed in places where strong draughts occur or in close proximity of fans or air-conditioning, etc.
  8. Any finished material placed on the front of the base or frame must not be thicker than 2cm.

Ribbon Fire Construction

  1. Body
    1. The main body is made of acid-proof steel, heat resistant, powder coated steel and is thermally insulated with mineral wool.
    2. The base is made of particleboard allowing other finished products to be easily applied.
    3. The decorative frame is also made of acid-proof steel. This frame covers the edges of the wall and includes ventilation ducts.
  2. Burning Chamber
    1. The channel which is firmly fixed into the casing, holds a limitless supply of Fanola® Digi due to the sensors controlled by the command unit.
    2. The sensor chamber houses the sensors which are responsible for controlling the burning process.
  3. Command Unit
    The command unit executes the commands, provides a constant supply of Fanola® Digi, launches the ignition sequence and extinguishes the fire.
  4. Control Panel
    The LCD control panel displays the current status of the product (e.g. remaining days until next maintenance check) and sends commands to the command unit.
  5. Safety System
    The safety system has two monitoring systems which receive information from the sensor chamber to secure proper and safe operation of the Digifire® and shuts the system down if there is a malfunction.

Ribbon Fire Technical Drawing