Flame Pro Technical Information
Installation Requirements
- The insert has to be set into a specially prepared cavity or recess.
- The product casing should be made of fire-safe plasterboard fixed to the metal-framed construction.
- The minimum surface area of the room (with ceilings of 2,6m / 8,53ft) must be at least 51m2 / 548,95ft2.
- A 1m (approx) electrical lead should be installed on the inside of the recess in order to provide power to the unit. If it cannot be done, the electrical socket should not be further than 1,5m / 4,92ft from the product.
- The room must have proper working ventilation with a regular provision of fresh air.
- All freestanding or loose flammable objects must be located no closer than 1m to the product.
- Product should not be installed in places where strong draughts occur or in close proximity of fans or air-conditioning, etc.
Flame Pro Construction
- The main body is made of acid-proof steel and powder lacquered steel.
- Burning Chamber
- The main chamber holds a limitless supply of Fanola-Digi due to the sensors controlled by the command unit.
- The sensor chamber houses the sensors which are responsible for controlling the burning process.
- The command unit executes the commands, provides a constant supply of Fanola-Digi, launches the ignition sequence and extinguishes the fire.
- The LCD control panel displays the current status of the product (e.g. remaining days until next maintenance check) and sends commands to the command unit.
- The safety system has two monitoring systems which receive information from the sensor chamber to secure proper and safe operation of the Digifire® and shuts the system down if there is a malfunction.
